Case Studies in Condition Monitoring: Real-World Challenges and Proven Solutions
Root Cause Analysis of Combined Impeller Looseness and Unbalance in an AHU Blower
Belt-driven, simply supported AHU blower with induction motor drive
Resolving Partial Discharge in an 11kV Cable Termination Through Advanced Monitoring
Detecting partial discharge damage and insulation degradation at an 11KV substation on our esteemed client site.
Thermography Case Study: Identifying Critical Hotspots Through Infrared Inspection in VFD panels of bus bars
Welcome to our case study on thermal imaging technology. In the realm of electrical system maintenance, thermal imaging stands out as a highly effective, non-contact ins…
Water Pump Bearing Fault Detection Using Vibration Measurements and PeakVue Analysis
The following case study presents a thorough analysis of vibration measurements and Peak Vue analysis conducted on the cooling water pump by the dedicated condition moni…
Mitigating Structural Resonance with Finite Element Analysis(FEA)
A glass bottle manufacturing facility transports raw materials through silos mounted on a steel support platform. Each silo is equipped with vibration exciters designed…